Quest[edit]
Walkthrough[edit]
- With Armory Access granted, it is time to keep working on the Scorched Detection Network.
- Head on through the bunker you gained access to, so start heading to the South, then turn to the Southwest.
- Head over to the dip in the fencing and then head to the West into the Brick Building.
- Inside the building, go over to the West and to the Security Door.
- There is a terminal nearby that you can use to open the Security Door.
- Head to the South and then go up the stairs up to the second floor.
- Immediately be on guard for the Machinegun Turret MK III.
- Turn to the Southwest from the top of the stairs and use the nearby hole in the wall, going across the boards to the next building.
- Move carefully as you approach the path toward the next stairs down because of a laser a tripwire connected to a flamethrower trap.
- You can either jump down the stairs or just run through the trip.
- Running through is suggested because of another Machinegun Turret MK III.
- Destroy the Turret and then continue to the Southeast.
- Once again, you will need to access a Terminal (Locked- Lv 0).
- You can also head to the Southwest and cross over into the next section of this building by using the conveyor belt.
- Go through the door in the corner of the room and into the fenced in walkway.
- Turn to the Northeast and go through the next door.
- Once again, you will need to deal with a Machinegun Turret.
- Another Machine gun rests just behind the first crates on the left.
- Continue to the Northeast from there and go on up the stairs in the back.
- Once again, you will need to deal with a Machinegun Turret.
- Destroy the Turret and then go forward before going through the doorway to the right.
- In this fenced in area, go to the back left to access another terminal.
- Once again, this terminal has a Lock on it (Lv 0).
- When you have hacked in, tell the terminal to open the Security Door.
- Go on through the now open nearby door and to the terminal on the left-hand side of the room.
- This is Raleigh's Terminal.
- Access the terminal and then load the Master Holotape.
- With it loaded, you will want to access the [Initiate program file scan].